IOI '18 P5 - Highway Tolls

View as PDF

Submit solution


Points: 30 (partial)
Time limit: 2.0s
Memory limit: 256M

Problem types
Allowed languages
C++

In Japan, cities are connected by a network of highways. This network consists of N cities and M highways. Each highway connects a pair of distinct cities. No two highways connect the same pair of cities. Cities are numbered from 0 through N-1, and highways are numbered from 0 through M-1. You can drive on any highway in both directions. You can travel from any city to any other city by using the highways.

A toll is charged for driving on each highway. The toll for a highway depends on the traffic condition on the highway. The traffic is either light or heavy. When the traffic is light, the toll is A yen (Japanese currency). When the traffic is heavy, the toll is B yen. It's guaranteed that A < B. Note that you know the values of A and B.

You have a machine which, given the traffic conditions of all highways, computes the smallest total toll that one has to pay to travel between the pair of cities S and T (S \ne T), under the specified traffic conditions.

However, the machine is just a prototype. The values of S and T are fixed (i.e., hardcoded in the machine) and not known to you. You would like to determine S and T. In order to do so, you plan to specify several traffic conditions to the machine, and use the toll values that it outputs to deduce S and T. Since specifying the traffic conditions is costly, you don't want to use the machine many times.

Implementation Details

You should implement the following procedure:

find_pair(int N, std::vector<int> U, std::vector<int> V, int A, int B)
  • N: the number of cities.
  • U and V: arrays of length M, where M is the number of highways connecting cities. For each i (0 \le i \le M-1), the highway i connects the cities U[i] and V[i].
  • A: the toll for a highway when the traffic is light.
  • B: the toll for a highway when the traffic is heavy.
  • This procedure is called exactly once for each test case.

The procedure find_pair can call the following function:

long long ask(const std::vector<int> &w)
  • The length of w must be M. The array w describes the traffic conditions. For each i (0 \le i \le M-1), w[i] gives the traffic condition on the highway i. The value of w[i] must be either 0 or 1.
    • w[i] = 0 means the traffic of the highway i is light.
    • w[i] = 1 means the traffic of the highway i is heavy.
  • This function returns the smallest total toll for travelling between the cities S and T, under the traffic conditions specified by w.
  • This function can be called at most 100 times (for each test case).

find_pair should call the following procedure to report the answer:

answer(int s, int t)
  • s and t must be the pair S and T (the order does not matter).
  • This procedure must be called exactly once.

If some of the above conditions are not satisfied, your program is judged as Wrong Answer. Otherwise, your program is judged as Accepted and your score is calculated by the number of calls to ask (see Subtasks).

Example

Let N = 4, M = 4, U = [0,0,0,1], V = [1,2,3,2], A = 1, B = 3, S = 1, and T = 3.

The grader calls find_pair(4, {0, 0, 0, 1}, {1, 2, 3, 2}, 1, 3).

In the figure above, the edge with number i corresponds to the highway i. Some possible calls to ask and the corresponding return values are listed below:

Call Return
ask({0, 0, 0, 0}) 2
ask({0, 1, 1, 0}) 4
ask({1, 0, 1, 0}) 5
ask({1, 1, 1, 1}) 6

For the function call ask({0, 0, 0, 0}), the traffic of each highway is light and the toll for each highway is 1. The cheapest route from S = 1 to T = 3 is 1 \to 0 \to 3. The total toll for this route is 2. Thus, this function returns 2.

For a correct answer, the procedure find_pair should call answer(1, 3) or answer(3, 1).

Constraints

  • 2 \le N \le 90\,000
  • 1 \le M \le 130\,000
  • 1 \le A < B \le 1\,000\,000\,000
  • For each 0 \le i \le M-1
    • 0 \le U[i] \le N-1
    • 0 \le V[i] \le N-1
    • U[i] \ne V[i]
  • You can travel from any city to any other city by using the highways.
  • In this problem, the grader is NOT adaptive. This means that S and T are fixed at the beginning of the running of the grader and they do not depend on the queries asked by your solution.

Subtasks

  1. (5 points) one of S or T is 0, N \le 100, M = N-1
  2. (7 points) one of S or T is 0, M = N-1
  3. (6 points) M = N-1, U[i] = i, V[i] = i+1 (0 \le i \le M-1)
  4. (33 points) M = N-1
  5. (18 points) A = 1, B = 2
  6. (31 points) No additional constraints

Assume your program is judged as Accepted, and makes X calls to ask. Then your score P for the test case, depending on its subtask number, is calculated as follows:

  • Subtask 1. P = 5.
  • Subtask 2. If X \le 60, P = 7. Otherwise P = 0.
  • Subtask 3. If X \le 60, P = 6. Otherwise P = 0.
  • Subtask 4. If X \le 60, P = 33. Otherwise P = 0.
  • Subtask 5. If X \le 52, P = 18. Otherwise P = 0.
  • Subtask 6.
    • If X \le 50, P = 31.
    • If 51 \le X \le 52, P = 21.
    • If 53 \le X, P = 0.

Note that your score for each subtask is the minimum of the scores for the test cases in the subtask.


Comments

There are no comments at the moment.